2026 Exmark Lazer Z S-Series LRS801GKA524A1

Information

2026 Exmark Lazer Z S-Series LRS801GKA524A1

Discover the Exmark Lazer Z S-Series Mower

The Lazer Z S-Series makes up the core of countless landscape professionals’ fleets. With 30 years of refinement and innovation, the Lazer Z S-Series delivers maximum durability and Exmark Signature cut quality, with options for larger decks and more powerful engines than the Lazer Z E-Series. Select from 52-, 60-, or 72-inch UltraCut Series 4, or 60- or 72-inch UltraCut Rear Discharge cutting decks, with a choice of powerful Kawasaki or EFI Kohler commercial engines.

In all, the Lazer Z S-Series delivers the power and productivity to make quick work of large jobs, with the reliability and long-term value Exmark owners expect. Be sure to check out the entire Lazer Z family, including the

Features may include:

Less Time At The Pump

A large 12-gallon fuel tank with a single fill location offers more runtime between fill-ups.

Built to Last

From the heavy-duty unibody frame, to the formed and welded high-strength steel cutting deck, the Lazer Z S-Series is built to thrive in extreme commercial cutting environments.

Onboard Diagnostics

Check vital mower functions at a glance on the digital screen. Functions include an electronic fuel gave with low fuel waring, battery voltage warning, hour meter and OPC safety switch. It’s troubleshooting made easy.

Easy to Service

The Lazer Z S-Series is designed to require minimal maintenance, with just four annual grease points, plus sealed, maintenance-free spindles, and quick, easy oil changes.

Ultracut Series 4 Deck

Built from formed and welded high-strength steel, UltraCut Series 4 full-floating decks feature maintenance free spindles with splined blade drivers to stop bolt tightening on impacts. The idler arm pivot bearings are also maintenance free.

Tool-less Belt Removal

The deck and hydro belts can be installed and removed without tools.

Photos

Highlights

  • Rudyard, Michigan
  • 2026
  • Exmark
  • Lazer Z S-Series LRS801GKA524A1
  • Model: FX801V | Series: V-Twin | Spec: FX801V-AS31-R
  • Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors. | Speeds: Infinitely Variable
  • Gas Carbureted
  • Available
  • 64.8"
  • 70.5" | Cutting: 1.0" to 5.5" in 0.25" increments

Specifications

  • 2026
  • Exmark
  • Lazer Z S-Series
  • LRS801GKA524A1
  • Zero-Turn Mower
  • Model: FX801V | Series: V-Twin | Spec: FX801V-AS31-R
  • Kawasaki
  • Electric
  • 852 cc
  • 26.5 hp
  • 3,750 RPM
  • Heavy-duty canister air filtration system
  • Carbureted | Fuel Indicator: Yes - electronic Sender
  • Gas Carbureted
  • Engagement: MagStop Electromagnetic 200 ft-lb clutch with spot brake
  • Hydro-Drive | Drive Wheel Release: Allows unit movement without engine running.
  • Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. Adjustable dampers (3 positions) to customize drive responsiveness
  • Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors. | Speeds: Infinitely Variable
  • Lever actuated disc brake
  • 13 x 6.5-6, smooth tread, semi-pneumatic
  • 23 x 9.5-12, 4 ply Grassmaster TL
  • 12-volt battery with 15-amp alternator.
  • Forward: 10.0 mph | Reverse: 0–7.0 mph
  • Blade: Approximately 18,500 fpm.
  • 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
  • Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • Casters Forks: .50" thick caster yoke arms.
  • 64.8"
  • Deck: 52"
  • 79.2" | Blades: 3 blades at 18.00"
  • 70.5" | Cutting: 1.0" to 5.5" in 0.25" increments
  • 12-gallon single fuel tank with single fill location
  • Curb: 1136 lbs.
  • Engine hour meter and cup holder | UPC: 193308247120 | Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
  • Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
  • Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. | Caster Forks: Cast steel caster fork | Style: Floating Deck | Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. | Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.