2026 Exmark Lazer Z X-Series LRX850GKA526Q1

Information

2026 Exmark Lazer Z X-Series LRX850GKA526Q1

Discover the Exmark Lazer Z X-Series Mower

For more than 30 years, the Exmark Lazer Z has been the choice of more landscape professionals than any other zero-turn mower. For pros that demand the absolute best durability, productivity, cut quality and innovation, the Lazer Z X-Series is the number one choice. With more configuration options than any other Exmark mower, the Lazer Z X-Series is the pinnacle of state-of-the-art commercial mowers. Choose from 52-, 60-, or 72-inch UltraCut Series 6, or massive 96-inch UltraCut Rear Discharge cutting decks. Our exclusive flow control baffles and Adapt tools-free deck rake adjustment deliver Exmark Signature cut quality and higher cutting speeds in any mowing conditions. Powered by a choice of state-of-the-art big block EFI V-Twin commercial engines from Kawasaki, Kohler and Vanguard, the Lazer Z X-Series powers through the largest jobs with ease. A long-travel full suspension operator seat features isolation bumpers to deliver a smoother ride for reduced operator fatigue.

When you’re looking for the pinnacle of power, performance, cut quality and durability in a commercial zero-turn mower, the Lazer Z X-Series is the obvious choice. Be sure to check out our other Lazer Z models as well, including the Lazer Z Diesel.

Features may include:

UltraCut Series 6 Deck

Our full-floating side-discharge deck design uses dual-capture anti-scalp rollers and double-row sealed bearings for ultimate durability, with splined blade drivers to stop bolt tightening from impacts. Plus, our patented idler arm bearing design needs only annual service. (The 96-inch Flex Wing deck is a rear-discharge design.)

Vanguard Oil Guard System

With oil change intervals of 500 hours, the Vanguard Oil Guard system increases mower uptime and decreases maintenance. Available on select Lazer Z X-Series models, the Oil Guard system also decreases engine oil temperature by 20-30 degrees.

Adapt Your Cut

Adjust deck rake quickly and easily without tools, from the operator seat, to optimize cut quality and performance in a variety of turf types and conditions. Adapt is particularly useful when mowing in wet, overgrown, or lush conditions, or stemmy grasses and weeds.

Easy to Service

The new Lazer Z X-Series is easier than ever to service, thanks to a rear engine guard that removes with just four bolts. Plus, a redesigned seat mount enables easier access to the engine and hydro drive components. Tools-free deck and hydro belt installation further eases maintenance.

Maximum Productivity

With a combination of increased power, faster control response, larger cutting decks and a high-capacity hydro drive system, Lazer Z X-Series delivers maximum productivity.

Superior Operator Comfort

Our new ergonomically-advanced operator seat features long-travel suspension and our exclusive iso-mount seat isolation. This seating system increases productivity by reducing operator fatigue, so each worker can work stronger, longer.

Photos

Highlights

  • Rudyard, Michigan
  • 2026
  • Exmark
  • Lazer Z X-Series LRX850GKA526Q1
  • Model: FX850V | Series: V-Twin | Spec: FX850V-AR10-R
  • Hydrostatic | Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 17.1 cubic inch motors. | Speeds: Infinitely Variable
  • Gas Carbureted
  • Available
  • 64.8"
  • 70.5" | Cutting: 1.0" to 5.5" in 0.25" increments.

Specifications

  • 2026
  • Exmark
  • Lazer Z X-Series
  • LRX850GKA526Q1
  • Zero-Turn Mower
  • Model: FX850V | Series: V-Twin | Spec: FX850V-AR10-R
  • Kawasaki
  • Electric
  • 852 cc
  • 27 hp
  • 3750 RPM
  • Heavy-duty canister air filtration system
  • Carbureted | Fuel Indicator: Yes - electronic Sender
  • Gas Carbureted
  • Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
  • Hydro-Drive | Drive Wheel Release: Allows unit movement without engine running.
  • Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. Adjustable dampers (3 positions) to customize drive responsiveness
  • Hydrostatic | Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 17.1 cubic inch motors. | Speeds: Infinitely Variable
  • Lever actuated disc brake
  • 13 x 6.5-6, smooth tread, semi-pneumatic
  • 23 x 9.5-12, 4 ply Grassmaster TL
  • 12-volt battery with 15-amp alternator.
  • Forward: 0-10.0 mph | Reverse: 0–6.0 mph
  • Blade: Approximately 18,500 fpm.
  • 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
  • Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • Casters Forks: .50" thick caster yoke arms.
  • 64.8"
  • Deck: 52"
  • 86.1" | Blades: 3 Blades at 20.50"
  • 70.5" | Cutting: 1.0" to 5.5" in 0.25" increments.
  • 12-gallon single fuel tank with single fill location
  • Curb: 1200 lbs.
  • Engine hour meter, USB plug-in, LED lights, phone tray and cup holder | UPC: 193308241487 | Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
  • Deluxe, three-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
  • Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. Equipped with Adapt system. | Caster Forks: Cast steel caster fork | Style: Floating Deck | Style Description: Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard. | Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.